Install wing tip sheet (7V9-1) & fiberglass tip (7V9-2)

Tip structure with light fixture

Used duct-tape to position wing tip sheet (7V9-1)into place on tip angles (7V8-2 & 3).  Drilled and clecoed in place (silver).

Prepared fiberglass tip (7V9-2) for mounting nav/pos light assembly (PSA green) by drilling 1" hole in the tip and installing 3/16" rivnuts for the two #6-32 mounting screws. 

Some small gaps in mating the two structures.  Will fill these with epoxy resin & micro-balloons at finishing.