Strap wing to curve nose-skin (7V7-1) into position

Nose-skin strapped into position around ribs

Nose-skin at rib 1 (leading to root rib)

Remove the clecos from the top-skin/front spar.  Strap the wing to curve the nose-skin (7V7-1) around the nose ribs (passing the slat brackets through the pre-cut slots which needed to be extended by ~5mm to fit).  Slide the nose skin UNDER the top-skin at the front spar to the 20mm line.  Once in position, drill and cleco (silver) into position.  Lots strapping/unstrapping to make alignments.