Pepare to install nose-rib skin (7V7-1)

Nose ribs re-installed - ready for Nose Skin (7V7-1)

Re-cleco nose ribs to front spar.  Remove clecos from front spar/bottom-skin. Unroll nose rib skin (7V7-1) into position, sliding nose rib skin UNDER bottom-skin to 20mm line. (This is for positioning & drilling only as nose skin will OVERLAP both top- & bottom-skin at final assembly.  Allow skin to droop over nose ribs noting positioning of the pre-cut slots in the skin to accomodate the slat mounting brackets.  Once positioned, drill through bottom-skin holes thru nose skin into front spar (silver clecos).